I will admit that I know nothing about the gear cases in these. My knowledge is only by taking apart the rear end case at least 4 times. Don't remember the weight of the oil, but I can tell you it is thick.
Here is my problem--after slippage and loosing all rear drive--I disassemble the rear end and inspect gears, fill the gear housing with oil (thick), check mesh and reassemble. All works fine for about 20 minutes then slippage, then no drive.
The front drive is working fine, but running only fronts puts undue strain on the motor and makes running full speed hazardous to the rear gears which are slipping. Sorry, forgot to mention it is a "Nitro" version if that matters.
How can I make the rear end fixed? Like a solid rear axle. No independent turning, just pure pull. Is there a simple fix, trick?
Please help me, I love the buggy. I spoke to someone with an electric version and he is experiencing the same problems. All of you die-hard Mini lovers, please help me with any suggestions if you can.
P.S. I love the .09 motor in it. That sucker screams after it warms up.
Bookmarks