I am having trouble getting my mini-inferno to run right. I cant seem to get the diffs to function properly.
Here is what I have:
Wraith7K+Quark and 2S or 3S maxamps Lipo packs
MIP Center ball diff
Front and Rear Atomic Ball Diff II
Atomic slipper set-up I think.
In order to get the car to move I have to tighten the F/R diffs as tight as I can get them. Set-up this way the car takes off of course the steering is compromised due to the Front diff being so tight. If I loosen the diffs slightly say even 1/4 turn when I give the car throttle it lets out a loud whine and will slowly accelerate. I can confirm by holding the car on the ground and giving it throttle that it is not the slipper.
What is the proper way to set-up the F/R atomic diffs? As tight as I have them if I have the car off the ground and try to spin one of the tires by hand the other one doesn't even move. And they seem to be so tight that they are not smooth.
Am I setting something up wrong? Are my diffs shot? Please help?
I am a relative novice but I have a mini-t that is set-up perfectly so I am not a complete idiot.
Please Help. I am ready to toss this thing out the window.
Bookmarks