+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16

Thread: Is this possible?

  1. #1
    Bill Killillay Guest

    Default Is this possible?

    Hello,

    Is it possible to put the buggy bodies onto the ST's and if so what is needed to make it work? I just bought an ST as everybody said that is what I should get. So that being done, how can I make it look like the buggy, which is what I really like?

    Thx,
    Bill K.

  2. #2
    bbking9 Guest

    Default

    Bill,

    I have done the same. You will need the buggy shock towers (front and rear) and I would recommend the buggy wheels/tires. You will also need the buggy wing mount and wing.

    Keep the ST arms - they are longer than the buggy - so it gives it a little wider, more stable stance.

    If you want - you can add the fake cooling head - but I did not. If you need a clear buggy body - 2 choices: JConcepts or a Pro-line crowd pleaser. The clear Kyosho body is very expensive.

    Think that is all you need.

    Which ST did you get (blue/orange or black/yellow)? I need a new Black/Yellow ST body. I have a new in package clear Buggy Pro-line crowd pleaser if you want to trade. I'll pay for your shipping the ST to me also. So if you have the black/yellow body - I'll ship you my new crowd pleaser buggy body and $5 cash. You ship me the ST body.

    If interested - you can post back here or email me at bbking9@lycos.com
    Last edited by bbking9; 03-26-2006 at 11:07 PM.

  3. #3
    Bill Killillay Guest

    Default Pictures

    Hello BBKing, thanks for the response, I sent you an email. That said, do you think you could send some pictures of your setup?

    Thx,
    Bill K.

  4. #4
    bbking9 Guest

    Default

    Well - I have it set up as the ST right now. So it looks like yours. However - I run the ST body with the buggy wing on it. I took the ST wing off and had to modify the ST body to allow the buggy wing to fit.

    I edited my previous post about trading bodies. I will throw in cash.

  5. #5
    Bill Killillay Guest

    Default

    I bought this one.

    If you can help me out with some links to the other items that I'll need, even down to the wheels and tires you have a deal.

    Shoot me an email, or respond to my email if you like.

    Thx,
    Bill K.

  6. #6
    bbking9 Guest

    Default

    Hey Bill,

    I'll help u out with P/N's whether you want to swap or not. But that is the body I need.

    The truck actually runs better as a buggy (lower CG and less weight becuase of the wheels/tires). But I am the opposite of you - I like the look of the ST truck. But I switch occasionally back to the buggy.

    Dinner time now - so I'll post P/Ns in a little bit.

    Billy

  7. #7
    Bill Killillay Guest

    Default

    Billy,

    Body swap is fine. I emailed you my address so that we can work out the details.

    Thanks,
    Bill K.

  8. #8
    bbking9 Guest

    Default

    Hey Bill,

    I had the P/Ns handy - so here ya go.

    Front and Rear shock Towers - IH21 (both are included)
    Buggy Wing - IH15W/Y (W=white/Y= yellow)
    Buggy Wing Mount - IH06 (Includes front and rear body posts)
    Wheel/Tires - IHTH01W/Y (W= white/Y= yellow)

    Thats it.

    I got all mine from www.rcboyz.com

  9. #9
    Bill Killillay Guest

    Default

    Thanks Billy,

    I've asked David if I can get these same parts included in my order that ships out tomorrow. If not, then I'll use the site you suggest.

    Thanks again for the help and I'll get the body shipped out as soon as it arrives, and your's arrives so that I can get your address.

    BK

  10. #10
    bbking9 Guest

    Default

    Sending you an email with the Mini Inferno User manual - so you have a referece for the new parts.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts