Brushless Motors, Controllers, etc.
...The AON 4900...Its a direct fit...I run my wires over the top to use the gap in the shell..I tried them around the side but they would hit...From the top is a mUCH better fit... ...HPI RS4 12t pinion...Lots to grab onto...There is a the TINIEST gap between the grub / set screw and the idler...
Hi guys, I received the .6 pinion today and tried to fit it on my Align motor. Shaftsize is okidoki but the gearmesh is different and won't fit at all!!. Shit happens :D I now ordered a metric 48dp pinion by Robinson and hope it will mesh better cause I am curious what the car will do with the...
hi looking for both 10 and 11 size pinion to fit on my mamba 25 motor, apart from trinity anyone know of one that will fit? cheers
On the back of the 540 mamba 7700kv motor it says "2s lipo max". Is that still the max power I can use if I'm running it off a 65a Quark roadster? Will a 3cell lipo instantly kill this motor?
Hey Guys, Here is a list of 380 Spec Brushless motors that will provide uber torque for your MI and MI ST's....These motors are better suited for usage with the heavy Mini's we have in comparison to 180 to 200 Size Brushless motors like the AO, Mamba, Etc... 380 Spec Motors will run cooler and...
Hi Folks, i've searched hi and low and can't find any anywhere. My head will explode soon. Has anyone got a link to where I can get them. Don't say ebay. I've search and only find the 540 size :( (.com & .co.uk) As seen HERE direct linik is very much appreciated. :(
Those of you with the Hyperion 600 and a 3Racing Alum motor mount - 1. Did you use the smaller mounting holes on the 6000 or the larger holes? 2. Neither seem to line up perfectly with the mount - did you have to enlarge the mounting holes on the 3Racing motor mount? 3. What size...
i would like to see someone work some magic..and make a 540 motor conversion...o man..a ss5800 in the h8 would fly! freakin i say atleast 70-75 mph with wheelies! lol
is hyperion YC-22 5000 or 6000kv good enough or at least comparable to Aon 4900kv ? I had decided to go with hyperion, but i just realised that b-p-p recommends 3-cell lipo or 9-10-cell setup :confused: . which one do you guys recommend for 8-cell (9.6v) setup? should i include warp 4 2turn...
Just as the title says :D where to get it to lol
the motor is great planes 28-35-3900 it is a 3900kv motor with tons of balls,,, mamba esc ,,,, vendetta truggy,,, MI ST wheels/tires,,,, 19/41 gearing (final drive is 5.46:1) this thing made my truggy extremely fast and would cause it to flip over if I didnt take precise control over the...
I got a couple Mamba 6800Kv systems for cheap. Skimming through this forum I realized, correct me if Im wrong, that the ESCs seem to be widely used but tended to be paired with motors from another manufacturer. What issuse do people have with mamba 1/18 motors and what can I do to...
I got the Align 430L because I heard that it virtually had no heat issues from this forum. I've ran it on sand, grass and concrete and it still gets very hot after less than 5 minutes. Can't hold my finger against it for more than 4 seconds :( I'm using it on the stock ST with an aluminum...
See ad in Off Topic Forum. Great motor - CHEAP !!!
Hi, I just visited the Bishop website and saw the Align 430L 3550KV for the MI. Now I saw a 430L 4050KV which spins faster. Will it be ok for the MI with my Mamba25 esc? I tried to run my mamba 8000kv with 8cells but I am not statisfied with it its speed running a 11teeth pinion. It is too small...
talked to troy and he sayed to put a Align 430LF motor and Quark controller in the inferno st. There are six different kind The other will go crazy fast. What do you think?
Has anybody tried the align 430 brushless motor??? It is an outrunner design. Here is a website that sells them. www.rchover.com/home. They also sell the quark33 esc....which can handle 5 lipo cells.....
vendetta truggy and buggy well today i went to test out my home made cvd's for the truggy,, things went well.. until 45minutes before i had to leave.. i broke a front cvd... so i switched everything over to the buggy ... ran the buggy with the gh4700 with the gearing set at 16/41 (6.48:1).....
Does anyone know how the two compare in a half8? Castle is telling me the 5400 will go about 30 to 35mph with a 14 tooth pinion and 8 cells. I was also told i can put a 10 cell and get a little more power, just as long as i lay off full throttle for more than 5 sec. Aon seems to be the hot setup,...
Hello. I am the owner of two aon 4900's and they are both different :confused: . One has a shaft allows to pinion to go flush against the motor, and the other gets thicker about 2mm from the motor. This makes the pinion came out farther. Whats going on? Thanks.
I have an Inferno ST and just purchased a Tekin ESC and AON 4900 motor... do I need a special motor mount for the AON motor? Will will the stock motor mount work? Do I need some kind of adapter?
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules