ESCs, Radios, Servos etc.
Hello Ladies and Gentlemen, Before I start this review, I would like to thank Troy over at www.b-p-p.com. He has replied to dozens of my e-mails gladly and I've talked to him over the phone. He is happy to answer my questions and always has a positive, and super nice attitude. He even soldered...
I have created a compilation of readily available ESCs suitable for 1/16th scale and above. The link is to an Excel workbook with three spreadsheets. Note the tabs on the lower left when you open it. The ESCs are mostly designed for 1/10th scale, but most will fit well in 1/16th scale. There is...
A friend of mine did this mod, but he has a lot faster servo then mine,(gonna buy a faster soon) Erlier i used HS85. Now Hitec HS945-MG, a beast servo, not so much faster,but a lot stronger 12kg :D ... http://galleriet.hobby-site.com/bilder/servomodd1.JPG...
well....got my inferno running today witht eh aon 4900 and the mamba 25 esc...AND I LOVE IT! its so fast! lol...and heres the problem...after the car goes a certain distance....which isnt very far...i stand on the grass on my front yard and try to run all the way to my neighbors front yard's grass,...
I am not new to the hobby but I am new to the half eight. Some might recognize my screen name from other forms. I just ordered my half eight last night. How many cells can be run on the stock electrics
When changing the servo with the stock electrics does it use a J or Z plug?
Not sure if my servo or receiver ESC is bad. Was at the new track today running my nitro trucks and decide to run my Mini Inferno. After running around the track a couple of times I ran in to a dirt bank. Now I do not have any steering. My ESC is working fine both forward and reverse. I checked the...
Hello everybody :p I'm newbie for the Rx/Tx choice :) and I have bought this cheap Tx/Rx: http://www.hitecrcd.com/Radios/aggressorAM.htm at Ebay. In first time, i would buy Novak XXL (41.99$ at Tower Hobbies) but the Hitec Aggressor (Tx & Rx cost only 22.9$ at Ebay). It's a good choice...
Hi Guys, Thanks to your entusiasm you convinced me to buy a mini inferno. Let me say that it's beautiful, I'm very happy with it. Although I begun using it this mornign (first run) I already have a problem: the stock servo sometimes remains stuck, it doesn't move for a bit and after it starts...
Dear all, Do you think the nano dragon receiver <http://www.toyeast.com/v3/pdtdetail.asp?pdt_id=A02101805> will work with the stock ST transmitter? I would like to substitute the receiver with the nano dragon's one so that I can use a standard servo (HB-85 or something else). Thanks, ...
Same as above... I put one in my Mini Inferno (I swap it with all my micro stuff now).. it is SO tiny!
Im going to be racing a mini inferno in the upcoming season and I want to get rid of the OE electronics, esc included. Obviously the HS81mg is the way to go along with my spektrum reciver. As far as speedo? I'll be running the xspeed motor and the SMC 8 cell pack. I was looking at the LRP...
i need some answers regarding the use of micro servo's. these are not used much nor discussed much on mini-zracer so i thought i would check with the guys here who are used to seperate electronic components. here is the situation... i am building a 1:32 CRT using the mr-02 electronics (pcb)...
Hey Guys my name is George i am from Greece and i just wanted to get some info for electronic setup Is this setup ok for my half 8 ?? 1...AON 4900kv Brushless Motor 2...Mamba 25amp Controller 2...Thunder Power Pro-lite 2100 11.1v Li-poly Pack 3...Apache S2500 1-4 cell Li-poly Charger...
Hi guys am I having a senoir moment ? I can't get this to calibrate. futaba 3PK and reciever that I took of my rc18 so I know it works. the servo works . when I turn ESC on I get a fast 3 blinks and beeps and then all lights blink and never stop. If I push the mode button nothing happens. I...
How good is the Perfex electronics compared to entry level Futaba or JR Racing? Will standard servo work, JR Z590M? or will I need to get a micro servo if I want to swap out the stock servo?
I've tried searching for the specs for the stock servo, but nothing.. Trying to find the torque and speed.. Does anyone know? Thanks.
Hi guys, which one should I choose for my JR xR3i? Hitec HFS03MM or GWS R6N II Is anyone using either receivers with a JR radio?
hiya gang, some of you know me from other sites. ;) i recently bought a halfeight for a beginner (38yo but new to rc). after following bithed's advice i got him a rtr with oil shocks (sato, really nice product), alloy front tower (gpm), bb's, xspeed motor. i told him to run it with the stock...
Has anyone tried this esc? If so, is it a good one? I like the onboard programing feature. I wonder how good the 8.0 motor is compared to the Warp 4 2 turn that I am planning on getting. I'm planning on racing this buggy just in case you're wondering. I've just about been all through this...
Hello All, I've been out of RC Ground dwellers for a long time now and so getting back into it in a limited way I figured that I would ask a few questions. I just bought an ST and the bits and pieces to turn my ST into a sudo buggy. Was just wondering, if I were to buy an after market radio...
...This is weird...The Mini Z platform uses the KT-2 and KT-5 controllers with RTR...the Mini Inferno lists the KT-3 as its controller...So WHY then does KYOSHO list that their stock replacement antenna will fit the KT-3 AND the KT-7? What IS the KT-7? :confused: Just more stuff to look forward to...
...On page 127 of the January 2006 issue of RC Driver there is a HiTec full-page ad and in it they 'announce' that their HS-65HB (Karbonite) and HS-65MG (Metal) servoswould be best suited for the ST... Quote: ' Designed specifically for the mini cars and trucks; This servo is as good as it gets!...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules