ESCs, Radios, Servos etc.
A friend of mine did this mod, but he has a lot faster servo then mine,(gonna buy a faster soon) Erlier i used HS85. Now Hitec HS945-MG, a beast servo, not so much faster,but a lot stronger 12kg :D ... http://galleriet.hobby-site.com/bilder/servomodd1.JPG...
Hello Ladies and Gentlemen, Before I start this review, I would like to thank Troy over at www.b-p-p.com. He has replied to dozens of my e-mails gladly and I've talked to him over the phone. He is happy to answer my questions and always has a positive, and super nice attitude. He even soldered...
I have created a compilation of readily available ESCs suitable for 1/16th scale and above. The link is to an Excel workbook with three spreadsheets. Note the tabs on the lower left when you open it. The ESCs are mostly designed for 1/10th scale, but most will fit well in 1/16th scale. There is...
Hello :) I'm "in the market" for a brushless set-up fit for my MIST, i really just need to find out *what* to buy, as i've never had a brushless car before. I'm going to New York tomorrow, so my dream of a brushless car could be, somewhat, fullfilled =) This is what i want to buy: Hitec...
...This is weird...The Mini Z platform uses the KT-2 and KT-5 controllers with RTR...the Mini Inferno lists the KT-3 as its controller...So WHY then does KYOSHO list that their stock replacement antenna will fit the KT-3 AND the KT-7? What IS the KT-7? :confused: Just more stuff to look forward to...
hello all. i am currently looking for a cheap but reliable 2ch stick radio for my car (i don't like the wheel type radios). could anyone tell me of a cheap but reliable stick radio + receiver combo. Thanks
i'm trying to use my old 2pl for my miniinferno but ii wont work properly. Can somebody help me? i'm a newbie
I just got a 3racing engine mount with the fan. Now since I understand I can run the RX off the same lead that is used for the ESC CH1. And the servo wire goes to CH2. Would it work if I put the fan wire onto the Batt slot on the RX??? Also its a Futaba 2ch RX.
Anyone know how many volts the 3racing fans can handle/are designed to use? Since it comes with that little extension I know it is designed to be wired straight into the esc battery leads, but I'm running 8 cells not the usual 6. Thanks!
Hi, Would the standard esc handle 9.6 volts? Cheers for the info, Stuart :)
If you're interested in finding the stall torque of a motor, you need: 1) A very good power supply capable of sustaining a set voltage while stalling the motor(hard to do with cells). 2) A method of measuring force(digital scale) 3) A lever of a known length 4) A motor First a note...
I was unaware that spektrum made a module for hitec's aggressor CRX. Now I can use the aggressor CRX with a 2.4ghz spektrum module and get feedback from the car (engine/motor RPM, temps, lap timing, etc.) It's going to be sweet especially considering the CRX is only about $170, and the spectrium...
Would this receiver http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=AIR92727Z work with a MC230CR esc, URC 1100 8 cell sport packs, hitec hs 85 servo, and a Rocket 400 motor? Thnx.
Is the Airtronics Micro RX AM 27 good in the H8?
OK gentilemen there is a new controller on the market. It is the Align 35 amp car controller. First and foremost I got this straight from the far east but it is available here now and I will update with an email address and web site for purchase. There are many things about this I like. One of...
what's the difference between a 25 amp brushless control unit and a 33 amp control unit? :confused: does more amps add more torque to the motor or something like that?
All right, my Inferneto is up and running! :D :D :D But about the antenna, how long must the wire be? And do I have to use the antenna pipe? On my first run with the X42s things got excited and I lost the pipe (found it later), so I just wrapped the antenna wire around the wing and the car was...
I have the Mini. All stock electronics and parts. Im still using 6. NiMh battery with the battery holder and now the wires on on the battery holders are damaged. Then I tried to fix it by soldering a new wire and thats the problem. After all are soldered and as I connect the pins the wires...
Has anyone had problems using rechargable batteries with the stock radio and stock battery setup? I'm trying to get my H8 to work while i'm waiting for my new esc and battery setup.
Hi, I'm am planning on buying a mini inferno st here in the next few weeks :D, and I have read articles on the car from dozens of different magazines and still can't find an anwser, will a 6-cell IB 1400 fit in the battery trays, and if it will, would I have to modifiy anything? Thanks
Hi, i need to find the type or the name of the batteries connector used on the mini inferno. Because i will make a wire to connect the pack directly to my battery charger. I can't find this information nowhere. Anybody can help me and tell me where i can find it? Many Thanks.
hello all. i have some old Nimh Battery packs that i would like to cut up and build some saddle packs for my mini inferno. the book that came with the ESC says the settings are Manual, Li-po high, Li-po low, Ni-Cd high and Ni-Cd low. my question is can i use Nimh cells with the Quark 33A universal...
Hey guys. I just bought my Mini Inferno at RCX 2 days ago and I was wondering if you guys could supply me with the name of a rechargeable battery maker for a pack for my half 8. I also need a link to the battery protection thing if possible. Thanks a bunch. God Bless. PS I already started to...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules