Non-Electronic Parts and Hop-Ups
...KYOSHO MINI INFERNO PARTS LIST... ...CORRECT AS AT FRIDAY NOVEMBER 04... IH100 Shock Stay Set IH101 Arm Set IH102 Front Shock Set IH103 Diff Gear Set (TWO needed for ONE car) IH104 Diff Small Parts Set (TWO needed for ONE car; this set will probably hold the ENLARGED diff cups which...
The first batch of chassis's are done! The chassis will allow the motor to be located in the stock position or rotated 180 degrees and be mounted towards the rear of the car (as in the photos). This is only advantageous to people using a brushless motor due to the fact that the motor will need...
...Unleashed soon from CAW, URC and BitHed...Just in time for it to poop under your Xmas tree...
My name is Ronny, and I'm from Norway. This is my first post here. I race 1/8 buggy for Mugen Seiki, RB Mods, Racing +, Neo-buggy etc. I just had my Half8 with me to the 1/8 OR Euro warm-up in France, where I gave the car a real run for it's money on the 2005 Euro's track. The car is equiped...
Recently i have bought a set of GPM C hub but was disappointed to found out that the bushings (the screw will be inserted through the bushing and mounted on the front knuckle) from the stock parts is unable fit in. :confused: It appears to be bigger and i couldnt find any custom bushings from...
i've been meaning to do this for some time now. i'd like to gather a listing of ball bearing sizes for various rc's as sort of a guide. i'm sure some information has already been gathered but i'd like to gather it all up into one post. Kyosho Mini-Z MR-01: Kyosho Mini-Z MR-015: Kyosho...
Well, I search some motors upgrades on rc mart and it came up with this motor. Anyway, I got it the other day and to my disappointment, it does not fit. For starters, the screws were bit short - but after some adjustments, they fit ok. Another thing is the cog or whatever it is called is too short!...
Anybody use a Rollover antenna? Does it work?
Hey fellas, I've got a set of Proline dish wheels headed my way and I want to dye them orange. Can I get some recomendations on how to do this and what kind of dye to use? Thanks....
I got the Kyosho IHW34 1/10 wheel adapters for my mini inferno. What front and rear dogbones are people using with them? I am having a problem with the front stock ones. When I turn the wheels hard they can pop out. They need to be about 1/8 to 1/4" longer it seems. Up front I am running...
Hey does anyone know where I can order a set of Proline solid white dish wheels for the 09? Appearantly theyve been discontinued. I've got two wheels, but I need two more. Thanks
gentlemen, i need some help locating those screws in the 09 diffs. flat head........links?
I am having trouble getting my mini-inferno to run right. I cant seem to get the diffs to function properly. Here is what I have: Wraith7K+Quark and 2S or 3S maxamps Lipo packs MIP Center ball diff Front and Rear Atomic Ball Diff II Atomic slipper set-up I think. In order to get the car...
hey guys dont know if its been posted before but im just trying to be helpfull as i dont have time to look through the forum i got myself a set of kyosho 1/10 convertors. i had the xspede ones which are rubbish and ppl get IRC outdrives etc etc but it seems kyosho have made what the owners...
Heres the problem: I was playing with my Half 8 (all stock) until it ran out of batteries. I decided to changed them and put new ones. Then the problem came. The car kept making this sort of soft clicking sound and went slowly. I held it up to see if it would work. For 2 seconds, the wheels would...
Anybody have experience with these? What parts do you need to build them?
hi. i'm a new mini inferno owner. i have a stock car and have been enjoying it. i've been reading this forum and it has been helpful (although talk on here has been a bit quiet lately.) our local track isn't that big and going brushless may be unnecessary. i'm thinking of upgrading using...
Just saw this on the kyosho web http://www.kyosho.co.jp/web/products/car_bike/half8/mini_inferno_09/mini_inferno_09_ready/mini_inferno_09_ready-e.html I wonder if this could fit in the Half 8. No more problems with diffs.
What pinions are people running? I have a Quark33 and wraith7k. And they are doing nasty things to those plastic gears. I have since gotten atomic Metal slipper gears. These seem good so far. But I have since stripped a metal pinion. I think it was a 12-14t. I am thinking that this is just to...
I purchased the integy 1/10 wheel adapters, but as it turns out, these adapters are so thick that when you put 1/10 wheels on, there is not enough thread left to attach a nut to hold the wheels on. I've tried 3 different sets of 1/10 wheels all with the same problem. The folks at integy are...
I tried to install Xspede wide conversion set. This works fine on the front wheels (were the cvd's are shorter than the rears). But on the rear wheels this doens't fit smooth. I even can't put my turnbuckle in the same inner hole on the shock tower like normal axles! And if I turn my rear...
Hey everyone, I have a aon 6000kv with the mini inferno, i keep stripping the slipper gear! are the alloy gears any good? Any cures for my problems Thanks Adrian
Did a search but came up empty. In order to run them in the Half *, I need the diff gear's, small part's set, and what diff cup's? ST? do I need anything else?
I am thinking of purchacing one. But was hoping for some input first! Thanks, Kevin
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
