Setup Sheets and Tips
Oh man this thing has horrible bump steer. ( bump steer is when the suspension moves and the steering angle (toe) changes left to right . SO the car steers itself when suspension gets compressed) I have the aluminum rack in it and a HS 81MG and atomic knuckles. any ideas?
what is the stock front shock oil for the ST? I have something wierd as my rear shocks feel good but the fronts have no damping. I went all the way up to 80 WT and now I have 1000 DIF OIL and still almost no damping they must be bleeding past the pistons or something.
I raced last night with the stock center dif glued. I was expecting problems but I got to tell you it was SOOOOOo controlable. I could drift out of hairpins with out the back coming out.( on hard packed dirt) it was the first time I felt really happy with this truck. If I gave it too much throttle...
Anybody have any good outdoor dirt setups? Mainly wanting to know supension adjustments. I'm using the 3R oil fill shocks and shock towers.
...Stock rims / tires are listed at 64mm high and 25mm wide... ...Essentially this is 1:10 size...They sit on a 3mm axle and fit with a hex hub...I have issues with the following... 1: I dont think the rears will be wide enough... 2: I dont want to be restricted to halfEIGHT rims... 3: I...
...The start of something glorious... ...as you can see the dummy is gone, the exhaust is gone...No battery mods yet...The hex is REALLY small so nothing fits :( TBONE bumper 'mocked' on...better pics coming...zip-tied the body clips... ...Stock electronics with KO PROPO EX-5... ...BTW...
...Can someone do me a favour and digitally WEIGH their STOCK chassis WITHOUT batteries, battery holders and green heat sink? this is my maniacal side ;) ...After LOTS of little mods here and there i have my chassis to 710 grams :)
...A quick internet search didnt get me what I wanted so time to ask for assisstance... ...What are the basics of a TRUGGY? How do i go about, What do i need to add or subtract to get my buggy pretending to be a truck? Any advice tips and most of all good LINKS would be very...
...After many tries this is the mod I am running now with HUGE success...Names and dates have been changed to protect the innocent... ...pull apart your knuckle set ups...This will give you a pile of (one side) a knuckle, a front hub, a front lower hinge pin and two e clips, 2 funky washers, and...
...i am upset...I lubed and de-lubed...I have put bearings IN the diffs and then taken them out... ...AON 4900 and 6cells...full gas from a dead start and the slipper is slipping against the BIG gear...I have done everything to make it connect right from the get go...What am i doing wrong? What...
...This is my 2000th post...To commerate I have started MY thread...I have been piggy-backing Ronny's for to long...Here is BitHed's Mini Inferno HalfEight buggy; very soon to become an ST... CHASSIS 3mm Randel Stevens carbon chassis… 1mm carbon PanicToys STiffy™ top plate… 2mm carbon top...
...this came up somewhere else and wasnt really addressed...I tremembered it and did some BASIC reseacrh but I am actually MORE confused then when i didnt know AYNTHING!! ...All this info I got from Longacre Racing Online ...this is what bump steer is... "Bump Steer is when your wheels...
...Here it is boys...Conversion from the buggy to the ST...PitBull chassis...Stickerless body...No inner body yet...Pretty easy to put together...One or two funky bits...but the pics first...
Hi there everyone, I"m glad 2 b back in action again. I was wondering if anyone can help me out here....Can anyone please show me how do I go about locking the Center Diff? If I get the Apogee li-po, do I also need to get another batt charger? pls. help. thks :(
hey guys I modded this KMRC chasis to accomodate two mamba 8Ks and two 3 cell lipos 2100s. I put two fans, a Hitech 225mg servo. this thing is soooo fast. I can make it flip at 20+mph. I thought my other mi was fun. this is a wild mod
Hey guys I'm new here I'm trying to get into the electric racing and I want to start out with the MIST, I've been doing alot of reading but I don't know where I stand I'm still a noob, I am however good at 1/8th and 1/10th Nitro buggys and trucks. Let me know what you all think of my setup for the...
I'm running GPM alu shocks towers and Kyosho original oil shocks (with black springs). I want to lower the ride height quite a bit as it's currently about 22mm front and back with normal wheels and tyres on, fully loaded with battery etc. Is it as simple as get softer springs or are there any other...
How many of you would Want a mini Inferno Blank set up sheet?
Hi, Gopher asked me if I have a ground up PitBull ST build up going on. He asked about parts cost with taking it that direction. In response I have opened this thread. I will document my PitBull chassis build of an Mini Inferno ST from nothing to finished running racer. I plan to list all parts...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules