PDA

View Full Version : Carbon Chassis for poly batts



Randelstevens
09-16-2005, 09:04 PM
If anyone is interested in Carbon chassis with poly sattel pack, hear is a proto-type design we are working on. Its 11.1 volts at almost 1900 mAh, the batts are in stock position preserving Kyosho designed center of gravity and no need to for any crazy set up changes. If anyone has any feedback on our design please let us know.

Pix are really bad, hope to have updated one's on asap

BitHed
09-22-2005, 05:55 AM
...Randel i like what you have done...I am of a similar opinion myself in regard to your design..one thing i succeeded at was removing the rear torque rod...I didnt like that it was on ONE side of the chassis / assymetrical...I fixed that ok and my plastic mock-up of the carbon part i want to put in pretty much solves the inherent flex problems...I will get you some picturtes of it...It works good so my layman's opinion is you dont need to keep that awful shaped hole at the back of the top plate...lose it, get rid of it...Stay flat and beautiful :D