View Full Version : mamba motor installation
Nitro-Maximus
09-11-2005, 06:43 AM
Do I need to modify the motor mount in install a mamba motor?
thanks guys
hkopium
09-11-2005, 10:05 AM
Do I need to modify the motor mount in install a mamba motor?
thanks guys
No. The Mamba motor can directly fit onto the H8 original motor mount.
But you may have a hard time to find a motor gear. Some modification is needed (i.e. trim the base of the gear, etc). The best fitted one is Team Associate 13T.
Good luck.
Nitro-Maximus
09-12-2005, 05:04 AM
Can I use the stock pinion???
I am currently running a 10T HPI pinion, I ran it today, but I needed more speed. I should gear a little higher...
BitHed
09-12-2005, 05:34 AM
...cant use stock...shaft is different...stock is 2.3mm...MAMBA is 2.0...you COULD shim it but stay safe and go with a pinion that fits...
Nitro-Maximus
09-13-2005, 01:06 AM
I know a 10T pinion is a bit low, I understand that the 13T associated can fit. Is that a good size pinion..
BitHed
09-13-2005, 01:45 AM
...10 wont fit due to chassis geometry...i understood that the MAMBA was best with a 13 due to overheating...I think Castle Creations even said DONT GO LOWER than 13...I may be wrong but i think thats right...Do a search for castle creations and the thread / message should come up...most of the mamba threads are quite early on...
holy_inferno
09-14-2005, 06:37 AM
I thought Castle Creations said don't go higher than 11t due to overheating...I was able to fit a 9t, 10t, and 11t with ease with a little cutting of the chassis. :)
Nitro-Maximus
09-22-2005, 05:10 AM
Actually....
I am currently running a 10T RC18T pinion in the inferno and she fits perfect. Our local track is a small track and it works perfectly with no overheating issues.
Thomas P
10-05-2005, 08:18 AM
Just direct fit, im running Atomics and AE rc18T Piniongs 15T and Mamba5400, and almost no cogg issiue. And it moves realy good. 2 x AE 3Racing zinks and its Hot, but no dangerous(can hold my fingers with out probbs,after a bash)
Powered by vBulletin™ Version 4.0.6 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.