PDA

View Full Version : Pinon Gear slipped out of the motor



trdcelica02
08-17-2005, 05:54 AM
I am running 8000 Mamba and the pinon slipped off the motor and grind the sliper gear....i tighten the pinion so tight and it slipped off when i was running it ...how can i fix this problem...

letian
08-17-2005, 03:27 PM
i had to grind it flat, then didn't slip out again :D

J.E.
08-18-2005, 05:42 PM
i had to grind it flat, then didn't slip out again :D

yes !! that is the only way to do it !! ;)

BitHed
08-21-2005, 11:52 AM
...yup...make a flat spot...btw you can use loctite or super glue too...either will melt / soften with a hot iron if you need to get them off...