PDA

View Full Version : Rx Problem?



srad30
06-11-2005, 04:17 AM
Hi Guys,
Can anyone tell why my new mamba performance kit will not ecept
a JR122 2ch 75mhz (AM) rX I have two and both did not work?
I checked them with other car and worked fine.
It would only work a seperate Hitec steering servo and not
mamba's esc?

tornacl90rx7
06-11-2005, 04:26 AM
Did you do the programming steps correctly ?? You might wanna try reversing the throttle channel on the TX ...

srad30
06-11-2005, 04:39 AM
Yes, I tried it over and over until I gave up and stole my JR310 (synth rx)
out of my hyper7 and it worked fine after first program?
I did not reverse the throttle on the tx- I am re-learning electrics but, wouldn't it work but be reversed on trigger and not make make it work at all?
Thanks for info I will try reversing tomorrow for heck of it.
Kevin L.

tornacl90rx7
06-11-2005, 05:20 AM
Nahh ... because the way the TX is stock, the ESC actualy sees the forward as a reverse... so try reversing the servo (channel 2) adn see if that works .....just a toruble shooting guess ....



Gregg