JonteJsson
05-25-2005, 02:02 PM
I have this OMNI cheap-ish 20$ charger with deltapeak it says that it is a "Automatic Ni-MH/Ni-Cd" charger but when I am supposed to choose the numbers of cells it states:
2cell 2.8V
3cell ..
4cell ..
5cell ..
6cell ..
7cell 9.6V
8cell 11.2V
The instruction says:
Example: Charge a 2.4V 1200mAh battery pack.
-Charge voltage=2.8V
I don't know what that setting mean. Could it be some feature that cut-off the voltage if it exceeds 2.8V for a 2.4V battery?
I would appreciate all your help.
2cell 2.8V
3cell ..
4cell ..
5cell ..
6cell ..
7cell 9.6V
8cell 11.2V
The instruction says:
Example: Charge a 2.4V 1200mAh battery pack.
-Charge voltage=2.8V
I don't know what that setting mean. Could it be some feature that cut-off the voltage if it exceeds 2.8V for a 2.4V battery?
I would appreciate all your help.