PDA

View Full Version : Dual Charging Adapters



SteveR1960
03-20-2007, 02:59 PM
Any opinions on the use of dual charging adapters:

Parallel: http://www.onlybatterypacks.com/showitem.asp?ItemID=10233.44

Series: http://www.onlybatterypacks.com/showitem.asp?ItemID=10142.44

tanandy09
03-21-2007, 05:41 AM
I don't think it is a good idea to use such adaptors, unless you are not concerned about performance of the batteries and uses extremely low charging currents.


Try Hobbicco's Accu-cycle Elite (http://www.hobbico.com/cyclers/hcap0280.html)
Or MRC's Superbrain 977 (http://www.modelrectifier.com/search/product-view.asp?ID=1908)
if you like charging 2 batteries at one time with one charger.

nmb
03-26-2007, 10:52 AM
I'm waiting for my duratraxx intellipeak deluxe charger and already have two packs of GMAXX 1200ma. I'll be charging them very slowly during night. Can I charge the two packs at once? Charger detects cell type and size.

tanandy09
03-26-2007, 10:38 PM
Yep... You can charge 2 packs at once if you are using a low charging current. (1/10th the capacity of the batteries)

Example... If you are charging an 8cell 1200mAh battery pack, Set the charge current @ 120mA. Charge the pack for about 14-16hours

If you are charging 2 packs of 8 cells in Series, Also charge them @ 120mA.

If the 2 packs are to be charged in parrellel, charge them @ 240mA.


BUT, i would just charge one pack at a time to make things less complicated and less risk of mistakes.

It is not recommended at all to charge both packs together using fast charge(1 hour quick charge). One of the packs will not be fully charged. and the other may be overcharged.