PDA

View Full Version : EP & GP Parts Interchangeable



RC_KAOS
12-16-2006, 01:36 AM
Does anyone know what parts are interchangeable between the EP & GP?

Cheers

t9dragon
12-16-2006, 04:01 AM
All of the suspension parts can be used on both.

RC_KAOS
12-16-2006, 04:03 AM
Sweet and what about the dogbones/drifeshafts?

Cheers

t9dragon
12-16-2006, 04:08 AM
Yep, the axles are the same but I'm not sure about the center drive shafts.

MGTfix
12-29-2006, 07:22 PM
After building my second car from parts, I found the center drives to be different and the servo saver is also different and cannot be used on the electric unless the akerman plate from the electric MI is used.

FHM101
01-19-2007, 04:14 PM
I was told by Kyosho America that the front C hubs, knuckles, and kingpins from the 09 would not fit the EP cars. They share the same bulks and arms, but I haven't checked to see if the F/R pin plates are the same on both cars. Other than the pin plates or the stub axles being different, why wouldn't the 09 front end work on the EP's?

t9dragon
01-21-2007, 05:27 AM
I was told by Kyosho America that the front C hubs, knuckles, and kingpins from the 09 would not fit the EP cars. They share the same bulks and arms, but I haven't checked to see if the F/R pin plates are the same on both cars. Other than the pin plates or the stub axles being different, why wouldn't the 09 front end work on the EP's?

If you use all three of those parts together they will work on the EP's. If you try to use them by themselves they will not work.