PDA

View Full Version : Clutch adjusting



minijosh
10-13-2006, 02:43 AM
I just wanted some info on adjusting my clutch. I'll be racing my truck on carpet with no jumps and when I hit the gas my clutch slips like its suppose to but I want to get rid of the lack of grip at the beginning. Will I make it tighter with that weird tool?

bermbuster
10-14-2006, 12:30 AM
you want to install a rubber washer like this:
http://cgi.ebay.com/Mini-Inferno-Half-8-Slipper-Pad-SOFT-by-Atomic_W0QQitemZ160009930625QQihZ006QQcategoryZ340 63QQcmdZViewItem
Back in the states you can find a similar sized rubber washer in the plumbing aisle at home depot.
The rubber gives more friction but under high stress will give.....

minijosh
10-14-2006, 04:58 AM
That's my new favorite store. I like the toyz. Thanks G.

gazzer55
10-15-2006, 12:16 AM
Where does that rubber washer go? )inbetween the 2 gears on the slipper shaft)??

Goad
10-23-2006, 10:34 PM
Where would you put the washer

davo
11-11-2006, 03:13 AM
i know this is old but incase you are still wondering, it goes in between the 2 gears. but sence in cheep and don't like waiting around i cut 2 circles of duck tape and stick one to one gear and the other to the other gear and reinstulled with the washer and it is working good. a little too much grab because i have it too tight but i think once i get it diled in i will be very happy with the results :D

davo
11-11-2006, 10:29 PM
scratch that. turned out bad. i couldn't get it to losen up enough. it ws ether locked or compleatly loose. :mad: