Atomic Slipper Gears

[Huey808]

could someone please tell me how the atomic slipper gears go together and what i have to pull out of the old plastic ones to set the atomic ones up.

[MrUnlimited]

They are 2 pieces. The larger one is 32teeth and the smaller one is 24teeth. BUT beware! The teeth of the spurs are NOT metric 48DP. I used a 21 teeth metric pinion by Titanium Racing for my Align 430L (it uses standard 1/10-1/12 pinions). Besides it is very noisy the gears won't fit very good. After 2 packs of batteries I discoverd lots of wear on the spurgear. I am now ordering Imperial 48dp pinions which I hope make less noise and fit better!

[R32dude]

You dont want to use the Atomic slipper gears as the are a very soft metal and will spit metal shavings all over the inside of your gear cover! Just stick with the stock gears and check you gear mesh often! I have a AON 4900 on 9.6v and the plastic gears are still fine! :D

[Huey808]

thanks. i am also running an 3550kv Align 430.