View Full Version : Stock Servo and Futaba Receiver?
Mut1ey
05-28-2006, 10:07 AM
Hi
Am I correct in thinking that I cannot use the stock servo with a futaba receiver because of this 4th wire?
Thanks.
ChrisOFNA
05-28-2006, 02:28 PM
Correct. You need a new servo.
Mut1ey
05-28-2006, 06:48 PM
Ok, so what is I get a Perfex Receiver unit - I'm pretty confident that that will be ok - of does that only accept the 3 wire, as it isn't a combined esc/speed controller?
ChrisOFNA
05-28-2006, 08:18 PM
What? That made no sense...
gorbasho
05-28-2006, 10:21 PM
Ok, so what is I get a Perfex Receiver unit - I'm pretty confident that that will be ok - of does that only accept the 3 wire, as it isn't a combined esc/speed controller?
= Ok, so what if I get a Perfex Receiver unit? - I'm pretty confident that that will be ok - Does that only accept a 3 wire servo, as it isn't a combined esc/receiver?
I'm pretty sure thats what you meant, Mut1ey, tell me if I'm wrong
ChrisOFNA
05-28-2006, 11:40 PM
If thats what you asked, then yeah...
Mut1ey
05-29-2006, 06:39 PM
Sorry, been away from my PC for a day or two.
To clarify, I have ordered off eBay a used Perfex receiver unit (so old it is white). I am wondering if this receiver will, a) not work with the stock H8 servo but b) will work with a new servo which only has 3 wires such as the hitec s85. Although I am only assuming that the Hitec etc, only have 3 wires.
Hope I haven't confused matters more.
Mutts
Powered by vBulletin™ Version 4.0.6 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.