lukeita
04-16-2005, 12:36 PM
Hello!
H8 original servo has 4 wires... normal servos have only 3 wires (5V, GND, signal) ... do you know how a "4 wire" servo works? A normal servo read a square-wave signal on the signal wire, if the on pulse is 1.5ms long the servo moves to center position, if the on pulse is 1ms the servo moves all right, 2ms all left...
thanks!
H8 original servo has 4 wires... normal servos have only 3 wires (5V, GND, signal) ... do you know how a "4 wire" servo works? A normal servo read a square-wave signal on the signal wire, if the on pulse is 1.5ms long the servo moves to center position, if the on pulse is 1ms the servo moves all right, 2ms all left...
thanks!