PDA

View Full Version : mod the RX to use 3wire standard servos



ongbenghui
04-18-2006, 04:02 AM
Hi,

Any guide to modify the standard receiver to accept normal 3 wire servos ?

I would like to mod the RX, not the Servos, given that I can reuse those
Servos in my other cars.

mOOsE
04-18-2006, 05:17 AM
negative. the esc/rx is not designed to output the needed servo pulses to operate a standard servo.

OvaYaHead
04-19-2006, 05:47 AM
the mod was only a few threads down from this one by crustynoodle

http://www.half-8.com/forums/showthread.php?t=1831

mOOsE
04-19-2006, 06:27 AM
he is looking to mod the RX, not the servo. The servo mod is very easy but you cannot mod the actual RX to accept a 3 wire servo.