PDA

View Full Version : LiPo for Mamba 8000



maricord
03-09-2006, 08:58 AM
Hi everybody!
I'm looking for a good LiPo pack, 11,1 v, not less than 2000mA, to use with a Mamba 8000.
What LiPo could you suggest me, that can be easily mounted in the half-eight chassis without problems?
ThanxXX a lot :) :) :)

ph2t
03-09-2006, 12:03 PM
The statments "2000mAh" & "can be easily mounted in the half-eight chassis without problems" are mutually exclusive......

ie: a 2000mAh pack is too large, maybe in a custom chassis but I'm not sure. Definately not in the stocker.....

Even if you were to go with 1000mAh packs, they would still be too large....

ph2t.

leapingbug
03-09-2006, 08:36 PM
http://www.b-p-p.com/proddetail.php?prod=j_hyp1800_3s
Ive got 2 of those lipos there one of the best on the market for performance.Now heres the fun part to make it fit rotate the diff to mount the motor on the other side drill 4 new holes for the motor mount http://www.one18th.com/ShowArticle139.htm heres how to do it
http://www.one18th.com/GetGallery9404.htm heres mine i just put the rx where the esc is and put the esc next to the engine :D

tech25
03-23-2006, 04:51 AM
This is what it will look like. http://image60.webshots.com/60/3/63/74/2198363740086019057HXKTHb_ph.jpg And the empty spot is where my thunder power goes link = http://www.b-p-p.com/proddetail.php?prod=j_%23TP2000_11.1