PDA

View Full Version : 380 Spec BL Motor options



dj_ski69
03-06-2006, 04:18 PM
Hey Guys,
Here is a list of 380 Spec Brushless motors that will provide uber torque for your MI and MI ST's....These motors are better suited for usage with the heavy Mini's we have in comparison to 180 to 200 Size Brushless motors like the AO, Mamba, Etc...
380 Spec Motors will run cooler and give more power....

note: when I say 380 Spec it means a motor can that has a diameter of at least 27mm and is between 37 and 45mm in length(with the shaft)

1) Kontronik Fun 400-36 Brushless Motor (http://www.aeromicro.com/Catalog/kontronik_fun_400-36_brushless_motor_2990020.htm)
2) Razor RZ-400 Brushless Motor (http://www.aeromicro.com/Catalog/razor__rz-400_2545108.htm)
3) Typhoon Brushless Motor EDF-2W (http://www.modelflight.com.au/brushless_motors/typhoon_brushless_motors.htm)
4) Aveox 27/13/2 (http://66.241.195.91/motors/aveox27.asp?path1=motors&path2=aveox27)
5) Feigao 380s series (take your pick) (http://www.himodel.com/en/rc_hobby/electric_311.php)
7) HiModel 2040U-14T KV4000 TP Series Brushless Motor W/ Finned Can (http://www.himodel.com/en/rc_hobby/electric_1223.php)
8) HiModel HM28-36 KV4000 Brushless Motor (http://www.himodel.com/en/rc_hobby/electric_933.php)
9) Hacker E3-49 Brushless 4900KV (http://www.aeromicro.com/Catalog/hacker_e3-49_brushless_motor_3964444.htm)
10) Lehner 1511 Series (15 turn recommended) (http://www.lehner-motoren.com/ms15.php?la=en)
11) Golden Horizons Air Power 4700 RPM Brushless Motor (http://www2.towerhobbies.com/cgi-bin/wti0001p?&W=000554853&I=LXJAB4&P=K)

The hacker motor is only 24mm in diameter but still will provide more torque than the mambas and the AON

I have not personally tried any of these motors yet (although I would like to try them all).... I am only going off of specs....
Also some of these motors may require a Different chassis setup like that of the Eclipse or Pitbull...

Peace

SkI

NakedApe
03-25-2006, 01:31 AM
Yeah I've just got a Hacker E30-13L. The specs are almost the same except the internal resistance is lower and the no load current is lower as well.

The back emf or kV is 4200rpm/Volt.

I'll let u know how I get on with 8 cells.