PDA

View Full Version : mamba help



drenalinejunki92
02-18-2006, 01:03 AM
Hi yea so i got a mamba 8000 in it yea dont give me crap with the u need a 5400 cus i dont care lol. but finally im seeing wat it reall can do after doing bout 45 on a straigt away i was happy. the problem is after i do full throttle and stop it stutters bad for a bit i then have to wait like 15 secs bfore it moves again and its not dead batts cus i can move everything just take a min to come back. is itmy batts ( wich are good 8 cell united rc 9.6 volt 1100mah) do i need a higher mah. Also Wat settigns can i change one the esc. am i forever doomed to do 40 mph .... not that im really comlaining thnaks for ne help.
--Paul

mat3833
02-18-2006, 01:09 AM
ok well first get yourself a Castle Link. change the settings to start power Med, timing High or medium, and brake type to reverse w/ delay or lockout. then change all conectors on your batts to DEANS.

Matt

bermbuster
02-18-2006, 01:20 AM
the 8000 doesnt have a lot of torque to get the buggy moving. Try gearing down to see if it helps with the cogging. Next is upgrade the batteries.....you need cells than discharge 20 or more amps.....

mat3833
02-18-2006, 01:30 AM
oh yea i forgot go with URC Extreme 42s not the sport cells. and use a 9 or 10 t pinion and you should be good.

Matt