View Full Version : I get the basic idea, but...
Hikari no Tenshi
02-13-2006, 08:44 PM
I know that this forum is mainly for the Kyosho half eight, and so the logical thing is to have a forum for the 1/8 scale version... but not all of us have kyosho 1/8ths (i'm assuming) so why not make it a more general 1/8 discussion area? I know I run an MBX-5, so a kyosho 1/8 forum doesn't help me much.
SteveP
03-14-2006, 02:06 PM
HNT - good to see that you're still around. ;) It's all good. Anyone that has any questions, let us know and we'll get and answer. I'll update my profile so I get emails when you post.
hey i have a hot bodies lightning 2rr and have no engine and am looking for one. but see i need a reliable engine thats in between $150-$200 and i need alot of bottom end but some top end to. so LMK. thanks.
Kory
MUGEN
03-17-2006, 10:51 AM
hey i have a hot bodies lightning 2rr and have no engine and am looking for one. but see i need a reliable engine thats in between $150-$200 and i need alot of bottom end but some top end to. so LMK. thanks.
Kory
in this price i recommend to you on the o.s. vz-b [not the v-spec]
I have the VZ-B V-SPEC on my mbx5 and i do enjoy from him from all tank of fuel...
i think that on this price the vz-b is the best that you can get
http://www.rcmart.com/catalog/product_info.php?cPath=421_38_508&products_id=15497
:cool:
thanks but since its $200.00 will me flywheel and clutch assembly off the lightning work on the o.s. its the stock clutch and evrything but will it work or will i have to go by a new set. LMK.
Kory
MUGEN
03-20-2006, 04:28 PM
yes the clutch system will work on the vz-b ,but
if the engine on your lightning is't with pilot shaft you will need to buy a new nut for the vz-b [5$]
;)
BiGRoB21
03-20-2006, 06:21 PM
kory i would sugest a werks collari b3. its a dam nice motor with loads of torque and good speed to top it off and will only run arround 175
will the stock clutch and clutch bell work on the collari B3. LMK.
Kory
jason9815
04-06-2006, 04:13 PM
will the stock clutch and clutch bell work on the collari B3. LMK.
Kory
I would assume most stock 1/8 scale 2 and 3 shoe flywheels and clutches will work on most motors w/ a pilot shaft. Like dude mentioned from above...if not just get a $5 nut. I have a trip-7 sp2 w/ The Werks Collari B3 mated w/ an Ofna JP-1 pipe and header, geared 46/13. It does scream! Almost too much bottom and just enough top on 100-150' straits. Would recommend a JP-2 for open tracks though. Good Luck!
J2
Powered by vBulletin™ Version 4.0.6 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.