PDA

View Full Version : I get the basic idea, but...



Hikari no Tenshi
02-13-2006, 08:44 PM
I know that this forum is mainly for the Kyosho half eight, and so the logical thing is to have a forum for the 1/8 scale version... but not all of us have kyosho 1/8ths (i'm assuming) so why not make it a more general 1/8 discussion area? I know I run an MBX-5, so a kyosho 1/8 forum doesn't help me much.

SteveP
03-14-2006, 02:06 PM
HNT - good to see that you're still around. ;) It's all good. Anyone that has any questions, let us know and we'll get and answer. I'll update my profile so I get emails when you post.

kory
03-17-2006, 12:27 AM
hey i have a hot bodies lightning 2rr and have no engine and am looking for one. but see i need a reliable engine thats in between $150-$200 and i need alot of bottom end but some top end to. so LMK. thanks.

Kory

MUGEN
03-17-2006, 10:51 AM
hey i have a hot bodies lightning 2rr and have no engine and am looking for one. but see i need a reliable engine thats in between $150-$200 and i need alot of bottom end but some top end to. so LMK. thanks.

Kory


in this price i recommend to you on the o.s. vz-b [not the v-spec]

I have the VZ-B V-SPEC on my mbx5 and i do enjoy from him from all tank of fuel...
i think that on this price the vz-b is the best that you can get

http://www.rcmart.com/catalog/product_info.php?cPath=421_38_508&products_id=15497

:cool:

kory
03-18-2006, 08:30 PM
thanks but since its $200.00 will me flywheel and clutch assembly off the lightning work on the o.s. its the stock clutch and evrything but will it work or will i have to go by a new set. LMK.

Kory

MUGEN
03-20-2006, 04:28 PM
yes the clutch system will work on the vz-b ,but
if the engine on your lightning is't with pilot shaft you will need to buy a new nut for the vz-b [5$]

;)

BiGRoB21
03-20-2006, 06:21 PM
kory i would sugest a werks collari b3. its a dam nice motor with loads of torque and good speed to top it off and will only run arround 175

kory
03-22-2006, 09:01 PM
will the stock clutch and clutch bell work on the collari B3. LMK.

Kory

jason9815
04-06-2006, 04:13 PM
will the stock clutch and clutch bell work on the collari B3. LMK.

Kory

I would assume most stock 1/8 scale 2 and 3 shoe flywheels and clutches will work on most motors w/ a pilot shaft. Like dude mentioned from above...if not just get a $5 nut. I have a trip-7 sp2 w/ The Werks Collari B3 mated w/ an Ofna JP-1 pipe and header, geared 46/13. It does scream! Almost too much bottom and just enough top on 100-150' straits. Would recommend a JP-2 for open tracks though. Good Luck!



J2