PDA

View Full Version : Pinion problem



creation30
10-24-2005, 04:19 PM
Hey guys,

I'm using the AE 18T 10T Pinion gear for the Mamba CM2080 brushless motor as recommended, but there seems 2 b a problem. :confused: The pinion when fitted with the shoulder (the side with the allen screw) towards the motor, it is not in line with the slipper gear. Do I need 2 totally re-position the motor on the chasis further forward in order 2 allow the slipper gear to be fully meshed withe pinion? Is the any other pinion around that can fit nicely? Tentatively I have reversed the pinion around with the shoulder on the outside on the motor shaft. It seems 2 work but dun tink it will last. Any recommendation pls? help me... :confused:

Oh ya, 1 more problem. the rear left hand wheel seems 2 b slipping. Why is this so? I have checked the rear gearbox gears and it seems ok. I'm using an aluminium center shaft, does that affect it? I really dun know what is wrong with the rear wheel.. :confused: